· Machinable work area - 1400mm(X) x 800mm(Y) · Z axis movement = 115mm 140mm Depth available under gantry · Overall machine dimensions (LxWxH) - 1800mm x 1450mm · Adjustable height for levelling · Power supply – 240v 16amp plug for machine, 13A mains for PC · Mach3 machine control software · UC400ETH motion controller · Remote XHc hand wheel controller. · Dell PC running Windows 10 · 2.2kW ER20 water cooled spindle (speed set in CAM software) · 4 Nm - Nema 23 stepper motors on each axis · Z probe · Inductive proximity sensors on each axis for hard limits · Emergency stop button · Axminster Craft dust extractor with 62mm hose

Custom Built 3 axis CNC router, with water cooled 2.2Kw spindle, This is not a high speed machine but I have found it reliable and highly accurate. I am now closing down the business and so I am reluctantly selling off most of my larger machinery. The machine is running on a Dell Windows PC and uses network connection. This gives a reliable interface with the machine allowing all functions such as Spindle speed, Dust control and axis remote jog. The Machine is supplied with a full set of ER20 collets and collet tooling. Part of the machine bed can be removed to allow end machining of longer stock, I have done Dovetails, finger joints and mortice & tenon Joints this way. I will also supply electrical drawings and all the data I have from the original build including CAD drawings. Buyer must collect and remove the machine. I am happy to help load the machine onto you transport but I do not have lifting equipment.

Specification

Back